PRIME 系列
PRIME TX ATX 3.1
力量ATX 3.0. 性能。 PRIME 。
1600 W
1300 W
海韵 PRIME TX ATX 3.1系列
The Seasonic PRIME TX ATX 3.1 Series is built on top of all the great features of PRIME TX platform with added ATX 3.1 and PCIe 5.1 compatibility. Currently the 1600 W and 1300 W units are equipped with native 12V-2×6 connectors, Digital Fan Control, and 105°C-rated Japanese electrolytic capacitors support stable power delivery under sustained thermal load. All these qualities make these power supplies perfect to welcome the newest high power graphic cards and processors on the market.
这海韵 PRIME ATX 3.0 系列电源最初出厂时配备12VHPWR 电缆。过渡到ATX 3.1 标准，这些型号已更新为使用新的 12V-2×6 连接器。
区别ATX 3.0 和ATX 3.1，您可以参考我们的常见问题解答： ATX 3.0 和ATX 3.1 标准的区别
Cybenetics - PRIME TX -1600 / 1300 ATX 3.1
欧洲硬件奖
PRIME TX -1600 ATX 3.1 开箱
PRIME TX ATX 3.1
PRIME TX ATX 3.1 - 1600瓦
ATX 3.1 和 16- Pin PCIe 第五代电缆（12V-2x6）
海韵的最新PRIME ATX 3.1 系列的设计和制造旨在为需要全新电源的新型 PC 组件提供动力。 ATX 3.1 和PCIe 5.1 标准。
微公差负载调节
海韵最新的设计将输出电压控制在非常窄的范围内，实现了低于0.5%的负载调整率。这种出色的电气性能和稳定性使这款电源成为高性能系统的理想之选。
微容差负载调节英特尔规格
数字混合风扇控制
海韵公司在设计市场上最安静、最高效的电源方面积累了丰富的经验，并将这些经验转化为混合模式的开发；这是一种先进的数字风扇控制技术，使用户能够将整体风扇噪音保持在尽可能低的水平。
注：数字混合风扇控制图表仅供参考。由于环境温度、系统设置、气流和其他不可预测因素的变化，曲线形状可能会有所不同。
-
降低噪音而不增加温度
-
由于风扇转速降低，风扇寿命得以延长。
-
始终保持最佳散热状态
-
无与伦比的无声表演Fanless 模式
流体动力风扇轴承
高性能流体动力轴承（ FDB这种风扇的设计充分利用了油的冲击吸收效应。它们极其可靠，运行噪音和发热量远低于滚珠轴承风扇。轴承表面的润滑减少了摩擦和振动，从而降低了整体能耗。由于其运转轻松、噪音更低，且结构坚固，这种可靠的风扇技术也大大延长了风扇的使用寿命。
-
当风扇轴旋转时，高压油会沿着轴承套筒的沟槽流动，在轴承表面之间形成一层薄薄的润滑层。
-
随着转速的提高，动态油压也随之增加，轴从轴承中抬起，从而实现平稳顺畅的旋转。人字形油槽有助于高效引导润滑油，防止泄漏。
规格如有变更，恕不另行通知。
规格如有变更，恕不另行通知。
推荐使用 12V-2×6 电缆进行安装
- 12V-2x6 电缆的两个 12V-2×6 连接器必须始终插入电源，确保它们完全插入、咔嗒一声锁定并拧紧。
- 电缆插入到位后，请勿弯曲或用力拉扯。
-
数据表
-
快速安装指南
-
用户手册
-
RoHS表格
常问问题
PRIME TX is built for users who want very high efficiency together with strong electrical performance. It carries an 80 PLUS Titanium rating and keeps load regulation below 0.5%. It is also designed for current high-end hardware, with ATX 3.1, PCIe 5.1 and native 12V-2×6 support.
It refers to how closely the PSU keeps its output voltage within the target range as system load changes. On PRIME TX ATX 3.1, load regulation is specified at under 0.5%. This does not mean the PC will automatically run faster, but it is part of the PSU's electrical performance and voltage stability.
No. The 1300 W and 1600 W models can also make sense for content creation or professional workstations with high power requirements. The important point is to choose the PSU according to the complete system rather than the GPU alone. For a very demanding workstation, it is also worth checking the number and type of GPU power connections required.
Earlier versions of this platform were originally released under ATX 3.0 and shipped with 12VHPWR cables. The current ATX 3.1 models use the revised 12V-2×6 connector instead. If you want to compare other Seasonic models using the current standard, you can browse our ATX 3.1 and PCIe 5.1 power supplies.
Not always, so check the available PSU space before buying. PRIME TX ATX 3.1 is 210 mm long, while ATX power supplies can vary quite a lot in depth. In some cases, drive cages or limited space for cable routing can reduce the room available for the PSU.